Mirror Polished Marine Hardware Mooring Dock Angled Bollard Stainless Steel 316 Yacht

Description:

1.Introduction:

Ship bollards refer to piles fixed on the deck or on the side of the pier for mooring ropes. Generally made of metal casting or welding. Because it bears a lot of force during use, its base is required to be very strong. On ships, bitts are usually installed on the bow, stern and midship decks.

2.Corrosion-Resistant Materials:

Made of 316 stainless steel, it has strong corrosion resistance. 316 stainless steel is a high-purity stainless steel material with good corrosion resistance and wear resistance. Its main advantages include: Higher corrosion resistance. Because 316 stainless steel contains high chromium and low carbon, it has good acid and alkali resistance and oxidation resistance. It can work stably at room temperature and is not easy to rust.

3.HIGH TENSILE STRENGTH:

Side pulling force is 5 tons.Dock Angled Pull, designed to improve the efficiency and safety of docking operations. With its unique angled design, it allows for easier and more precise maneuvering of the vessel, reducing the risk of accidents and damage to the vessel and dock.

Applications:

1.Usage environment requirements:

In order to fix the tail end of the cable during docking and mooring towing operations, bitts for pulling cables are distributed on the bow and poop decks and amidships decks. The force on the cable pile is very large, so the base must be ten minutes in advance, and the deck near the cable pile needs to be strengthened.

2.QUICK SETTING DESIGN:

Our dock bollard is designed to provide reliable and secure mooring solutions for your vessels. With its robust construction and durable materials, it ensures the safety of your dock and ships

3.WIDE APPLICATIONS:

The installation types of the equipment include those directly welded to the deck, some installed reinforced composite panels on the deck and then welded, and some installed on the base and welded to the main deck. For the above installation methods, although the methods are different, the welding requirements are the same. The welds should be free of defects such as cracks, missing welds, weld nodules, arc craters, etc. For mooring equipment that uses a small amount of steel castings, the steel castings are directly welded to the hull structure during installation. The welding requirements are the same as above. After the above-mentioned mooring equipment is installed, its installation position and installation quality should be checked.

Application display

Application 1, Application 2